Share RedHat EX200 exam practice questions and answers from Lead4Pass latest updated EX200 dumps free of charge.
Get the latest uploaded EX200 dumps pdf from google driver online. To get the full RedHat EX200 dumps PDF or dumps
VCE visit: https://www.leads4pass.com/ex200.html (Q&As: 111). all RedHat EX200 exam questions have been updated, the answer has been corrected!
Make sure your exam questions are real and effective to help you pass your first exam!
[RedHat EX200 Dumps pdf] Latest RedHat EX200 Dumps PDF collected by Lead4pass Google Drive:
https://drive.google.com/file/d/186p_qtUiqE5-F5VLXo0vnNj-iTAWpJBT/
[RedHat EX200 Youtube] RedHat EX200 exam questions and answers are shared free of charge from Youtube watching uploads from Lead4pass
Latest Update RedHat EX200 Exam Practice Questions and Answers Online Test
QUESTION 1
User mary must configure a task.
Requirement: The local time at 14:23 everyday echo “Hello World.”.
Correct Answer: Check the answer in the explanation.
crontab -u mary -e
23 14 * * * echo “Hello World.”
QUESTION 2
Whoever creates the files/directories on a data group owner should automatically be in the same group owner as data.
Correct Answer: Check the answer in the explanation.
1.
chmod g+s /data
2.
Verify using: ls -ld /data Permission should be like this: drwxrws— 2 root sysadmin 4096 Mar 16 18:08 /data If SGID bit
is set on directory then who every users creates the files on directory group owner automatically the owner of parent
directory. To set the SGID bit: chmod g+s directory To Remove the SGID bit: chmod g-s directory
QUESTION 3
Configure a cron Task.
User natasha must configure a cron job, local time 14:23 runs and executes: */bin/echo hiya every day.
Correct Answer: Check the anser in explanation.
crontab –e –u natasha 23 14/bin/echo hiya crontab -l -u natasha // view systemctlenable crond systemcdlrestart crond
QUESTION 4
Create the following users, groups, and group memberships:
A group named adminuser.
A user natasha who belongs to adminuser as a secondary group A user harry who also belongs to adminuser as a
secondary group.
A user sarah who does not have access to an interactive shell on the system, and who is not a member of adminuser,
natasha, harry, and sarah should all have the password of redhat.
Correct Answer: Check the anser in explanation.
groupadd sysmgrs
useradd -G sysmgrs Natasha
We can verify the newly created user by cat /etc/passwd) # useradd -G sysmgrs harry # useradd -s /sbin/nologin sarrh #
passwd Natasha # passwd harry # passwd sarrah
QUESTION 5
Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Correct Answer: Check the anser in explanation.
Use fdisk /dev/hda ->To create new partition.
Type n-> For New partition
It will ask for Logical or Primary Partitions. Press l for logical.
It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
Type the Size: +100M ->You can Specify either Last cylinder of Size here.
Press P to verify the partitions lists and remember the partitions name. Default System ID is 83 that
means Linux Native.
Type t to change the System ID of partition.
Type Partition Number
Type 82 that means Linux Swap.
Press w to write on partitions table.
Either Reboot or use partprobe command.
mkswap /dev/hda? ->To create Swap File system on partition.
swapon /dev/hda? ->To enable the Swap space from partition.
free -m ->Verify Either Swap is enabled or not.
vi /etc/fstab/dev/hda? swap swap defaults 0 0
Reboot the System and verify that swap is automatically enabled or not.
QUESTION 6
Create a volume group, and set 8M as a extends. Divided a volume group containing 50 extends on volume group lv
(lvshare), make it as ext4 file system, and mounted automatically under /mnt/data. And the size of the floating range
should set between 380M and 400M.
Correct Answer: Check the anser in explanation.
# fdisk # partprobe # pvcreate /dev/vda6 # vgcreate -s 8M vg1 /dev/vda6 -s # lvcreate -n lvshare -l 50 vg1 -l # mkfs.ext4
/dev/vg1/lvshare # mkdir -p /mnt/data # vim /etc/fstab /dev/vg1/lvshare /mnt/data ext4 defaults 0 0 # mount -a # df -h
QUESTION 7
Notes:
NFS NFS instructor.example.com:/var/ftp/pub/rhel6/dvd
Correct Answer: Check the anser in explanation.
YUM http://instructor.example.com/pub/rhel6/dvd ldap http//instructor.example.com/pub/EXAMPLE-CA-CERT Install
dialog package. yum install dialog
QUESTION 8
Your System is going use as a router for 172.24.0.0/16 and 172.25.0.0/16. Enable the IP Forwarding.
1.
echo “1” >/proc/sys/net/ipv4/ip_forward
2.
vi /etc/sysctl.conf net.ipv4.ip_forward=1
Correct Answer: Check the anser in explanation.
/proc is the virtual filesystem, containing the information about the running kernel.
To change the parameter of running kernel you should modify on /proc. From Next reboot the system, kernel will take
the value from /etc/sysctl.conf.
QUESTION 9
Configure
your web services, download from http://instructor.example.com/pub/serverX.html And the services must be still running
after system rebooting.
Correct Answer: Check the anser in explanation.
cd /var/www/html wget http://instructor.example.com/pub/serverX.html mv serverX.html index.html /etc/init.d/httpd
restart chkconfig httpd on
QUESTION 10
Create a swap space, set the size is 600 MB, and make it be mounted automatically after rebooting the system
(permanent mount).
Correct Answer: Check the anser in explanation.
if=/dev/zero of=/swapfile bs=1M count=600 mkswap /swapfile /etc/fstab: /swapfile swap swap defaults 0 0 mount -a
QUESTION 11
Add user: user1, set uid=601 Password: redhat The user\\’s login shell should be non-interactive.
Correct Answer: Check the anser in explanation.
# useradd -u 601 -s /sbin/nologin user1 # passwd user1 redhat
QUESTION 12
Open kmcrl value of 5 , and can verify in /proc/ cmdline
Correct Answer: Check the anser in explanation.
# vim /boot/grub/grub.conf kernel/vmlinuz-2.6.32-71.el6.x86_64 ro root=/dev/mapper/GLSvgGLSrootrd_LVM_LV=GLSvg/GLSroot rd_LVM_LV=GLSvg/GLSswaprd_NO_LUKSrd_NO_MDrd_NO_DM
LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us crashkernel=auto rhgb quiet
kmcrl=5 Restart to take effect and verification: # cat /proc/cmdline ro root=/dev/mapper/GLSvg-GLSroot
rd_LVM_LV=GLSvg/GLSroot rd_LVM_LV=GLSvg/GLSswap rd_NO_LUKS rd_NO_MD rd_NO_DM
LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet kmcrl=5
QUESTION 13
Configure autofs.
Configure the autofs automatically mount to the home directory of LDAP, as required:
server.domain11.example.com use NFS to share the home to your system. This file system contains a pre configured
home directory of user ldapuserX.
Home directory of ldapuserX is:
server.domain11.example.com /home/guests/ldapuser
Home directory of ldapuserX should automatically mount to the ldapuserX of the local /home/guests Home directory’s
write permissions must be available for users ldapuser1’s password is password
Correct Answer: Check the anser in explanation.
yum install -y autofs mkdir /home/rehome
/etc/auto.master /home/rehome/etc/auto.ldap Keep then exit cp /etc/auto.misc /etc/auto.ldap
/etc/auto.ldap ldapuserX -fstype=nfs,rw server.domain11.example.com:/home/guests/ Keep then exit systemctl start
autofs systemctl enable autofs su – ldapuserX// test
If the above solutions cannot create files or the command prompt is -bash-4.2$, it maybe exist multi-level directory, this
needs to change the server.domain11.example.com:/home/guests/ to server.domain11.example.com:/home/guests/
ldapuserX. What is multi-level directory? It means there is a directory of ldapuserX under the /home/guests/ldapuserX in
the questions. This directory is the real directory.
For the full RedHat EX200 exam dumps from Lead4pass EX200 Dumps pdf or Dumps VCE visit: https://www.leads4pass.com/ex200.html (Q&As: 111 dumps)
ps.
Get free RedHat EX200 dumps PDF online: https://drive.google.com/file/d/186p_qtUiqE5-F5VLXo0vnNj-iTAWpJBT/