exam2pass best Cisco CCDP 300-115 dumps practice exam questions and answers free update. Shared the latest Cisco CCDP 300-115 dumps pdf materials and vce youtube free demo. “Implementing Cisco IP Switched Networks” is the name of Cisco CCDP https://www.exam2pass.com/300-115.html exam dumps which covers all the knowledge points of the real Cisco exam. Get the new Cisco CCDP 300-115 dumps pdf training resources and study guides download free try, pass Cisco 300-115 exam test easily.
The best Cisco 300-115 dumps pdf questions and answers free download: https://drive.google.com/open?id=0B_7qiYkH83VROUdnZWRYLTJta1E
The best Cisco 300-075 dumps pdf questions and answers free download: https://drive.google.com/open?id=0B_7qiYkH83VReEMzbXFDTzJDZEU
Vendor: Cisco
Certifications: CCDP
Exam Name: Implementing Cisco IP Switched Networks
Exam Code: 300-115
Total Questions: 456 Q&As
QUESTION 1
An enterprise network has port security sticky enabled on all access ports. A network administrator moves a PC from one office desk to another. After the PC is moved, the network administrator clears the port security on the new network switch port connecting to the PC, but the port keeps going back into errdisabled mode.
Which two factors are possible causes of this issue? (Choose two)
A. Port security sticky exists on the new network switch port
B. Port security sticky is disabled on the new network switch port
C. Port security must be disabled on all access ports
D. Port security is still enabled on the older network switch port
E. Port security sticky is still enabled on the older network switch port
Correct Answer: AE
QUESTION 2
Which two statements about SPAN source and destination ports during an active session are true? (Choose two.)
A. The source port can be only an Ethernet physical port.
B. The source port can be monitored in multiple SPAN sessions.
C. The destination port can be destination in multiple SPAN sessions.
D. The destination port does not participate in STP.
E. You can mix individual source ports and source VLANs within a single session.
Correct Answer: BD
QUESTION 3
When a Layer 2 EtherChannel is configured, which statement about placement of the IP address is true?
A. The IP address is placed on the highest numbered member port.
B. The IP address is placed on the port-channel logical interface.
C. The IP address is placed on the lowest numbered member port.
D. The IP address is assigned via DHCP only.
Correct Answer: B
QUESTION 4
300-115 dumps Which VRRP router is responsible for forwarding packets that are sent to the IP addresses of the virtual router?
A. virtual router master
B. virtual router backup
C. virtual router active
D. virtual router standby
Correct Answer: A
QUESTION 5
Refer to the exhibit.
When a network administrator is attempting an SSH connection to the device, in which order does the device check the login credentials?
A. RADIUS server, local username, line password
B. RADIUS server, line password, local username
C. Line password, local username, RADIUS server
D. Line password, RADIUS server, local username
Correct Answer: A
QUESTION 6
Enablement of which feature puts the port into err-disabled state when the port has PortFast enabled and it receives BPDUs?
A. BPDU filtering
B. BackboneFast
C. EtherChannel
D. BPDU guard
Correct Answer: D
QUESTION 7
Your customer has asked you to come in and verify the operation of routers R1 and R2 which are configured to use HSRP. They have questions about how these two devices will perform in the event of a device failure.
Refer to the exhibit. If router R1 interface Etherne0/0 goes down and recovers, which of the statement regarding HSRP priority is true?
A. The interface will have the priority decremented by 40 for HSRP group 1.
B. The interface will have the priority decremented by 60 for HSRP group 1
C. The interface will have its current priority incremented by 40 for HSRP group 1
D. The interface will have its current priority incremented by 60 for HSRP group 1
E. The interface will default to the a priority of 100 for HSRP group 1
Correct Answer: C
QUESTION 8
Which database is used to determine the validity of an ARP packet based on a valid IP-to-MAC address binding?
A. DHCP snooping database
B. dynamic ARP database
C. dynamic routing database
D. static ARP database
Correct Answer: A
QUESTION 9
A network engineer is installing a switch for temporary workers to connect to. The engineer does not want this switch participating in Spanning Tree with the rest of the network; 300-115 dumps however, end user connectivity is still required. Which spanning-tree feature accomplishes this?
A. BPDUblock
B. BPDUfilter
C. BPDUignore
D. BPDUguard
E. BPDUdisable
Correct Answer: B
QUESTION 10
RSPAN has been configured on a Cisco Catalyst switch; however, traffic is not being replicated to the remote switch. Which type of misconfiguration is a cause?
A. The RSPAN designated VLAN is missing the remote span command.
B. The local and remote RSPAN switches are configured using different session IDs.
C. The local RSPAN switch is replicating only Rx traffic to the remote switch.
D. The local switch is overloaded with the amount of sourced traffic that must be replicated to the remote switch.
Correct Answer: A
QUESTION 11
Refer to the exhibit. Which two commands ensure that DSW1 becomes root bridge for VLAN 10 and 20? (Choose two)
A. spanning-tree mstp 1 priority 0
B. spanning-tree mst 1 root primary
C. spanning-tree mst vlan 10,20 priority root
D. spanning-tree mst 1 priority 4096
E. spanning-tree mst 1 priority 1
F. spanning-tree mstp vlan 10,20 root primary
Correct Answer: BD
QUESTION 12
Which two options are two results of using the command spanning-tree vlan 50 root primary within a spanning-tree network under global configuration? (Choose two.)
A. Spanning tree determines the priority of the current root for VLAN 50 and reduces the priority of the local switch to a lower value.
B. The priority value for VLAN 50 is set to 4094 on the root while the local switch priority is set to 32768.
C. The spanning-tree timers are reduced to improve the convergence time for VLAN 50.
D. All ports that are configured on the current switch with VLAN 50 transition to designated ports.
E. The switchport that is configured for VLAN 50 is the primary connection to the spanning-tree root switch.
Correct Answer: AD
Read more: https://www.exam2pass.com/300-115.html dumps exam questions and answers free update, the best and most updated Cisco CCDP 300-115 dumps pdf training materials.
The best Cisco CCDP 300-115 dumps vce youtube free demo: https://youtu.be/wyXFLuYtFpI